ISEW series 99 Embroidery Spray Adhesive
Butane 1-10%、Propane 10-30%、 Rubber 10-20%、Solvent oil 20-45%、Dimethl ether etc 1-10%.
1. Using imported raw materials and adopting international advanced formula, high solid, excellent performance, strong adhesion;
2. Uniform spraying with a mist effect, no spot、shrink、wrinkle on most of materials;
3. Low permeability and gel will not move. The surfaces of bonded materials can be removed easily and can stick repeatedly;
4. Easy and convenient to use, light smell and environment friendly,without harmful ingredients to human body and atmospheric ozone layer.Usages Bond fabric, paperboard, sponge, cork wood, plastic, insulating materials, water proof materials, metal foil, fiber glass, etc. Used in computer embroidery, artistic designing, type setting, furniture industries and so on.
1. Shake well before use. Spray evenly with a distance 20cm between the valve and the target materials;
2. Temporary bonding: single side sprayed, allow to dry 10sec-1min before bonding;
3. Permanent bonding: double sides sprayed, allow to dry 10sec-20 min before bonding.
1. This product is packed with pressure, store away from heat and fire source and avoid direct sunlight;
2. Keep it out of reach of children, exhaust the adhesive and puncture the can before discarding;
3. Keep the work shop well ventilated. Contact with eyes or skin,wash off with water and get medical attention immediately.
2 years in normal temperature. If the adhesive does not go bad after
2 years, it still can be used.
GB18583-2008, REACH, do not contain CFC, will not destroy the atmospheric ozone layer.
48 scans in one big box 4*(12 scans inside box)