1. 6 Head Embroidery Machine
2. Cap embroidery machine
3. Computer embroidery machine
4. Embroidery machine price
5. Industrial embroidery machine
6. Embroidery sewing machine
7. High speed embroidery machine
I. Main features of the embroidery machine.
1. 9/ 12/ 15 needles, 6 heads, suitable for flat bed embroidery, cap embroidery and finished garments embroidery
2. Embroidery area: 400 X 450 mm, or 15.7" X 17.7"
3. Automatic thread trimmer
4. Maximum speed 1000 SPM
5. 270° Wide cap frame unit
6. 10" color LCD display showing real time stitching
7. USB port ready
8. Auto color change
9. Thread break detection
10. Pre-Sew Design Trace capable
11. Memory size: 20, 000, 000 stitches
12. Electricity: 110V/60Hz or 220V/50Hz available
13. Start, Stop, and Emergency Stop
14. On-board lettering
II. Full coler control panel
1.12" High Definition color LCD display showing real time stitching
2. Function keys including Menu, Speed up and slow
Down (also Page Up and Page Down), Help, USB-
Input, Parameter Settings, Clear, ESC, Enter, etc.
3. Numeric keys for selection of needles
4. Frame-moving keys
5. Manual Trimming
6. Manual Color Change
7. Embroidery Status
8. Embroidery Method
9. DOT Key to return to 100 degrees
10. Mutli languages available
1 Sash Frame: 40.5cm X 48cm (16" X 19") for single head, 81cm X 48cm (32" X 19") for 2 head
2 sets of back hoops for 30cm X 30cm (11.80" X 11.80") for each head
2 sets of front hoops of 19cm (7.50") for each head
2 sets of front hoops of 15cm (5.90") for each head
2 sets of front hoops of 12cm (4.70") for each head
2 sets of front hoops of 9cm (3.50") for each head
|Single sequin device: install on both side of the head (first needle or end needle)||Simple coiling/cording device: install on both side of the head (first needle or end needle)|
Eight in one device:
Install on hoop frames (embroidery on pocket, sock, ect.)
Simple taping device:
Install on both side of the head (first needle or end needle)
Install on each needle
Laser position device:
Install on all single head embroidery machine
Packing and Delivery
Divery term: Production takes around 13 days ship within 7-10days after receiving 100% payment
Payment term: 30% TT advance payment before production, 70% TT remaining balance before shipping.
V. Our service
1. Pre-sale & in-sale services
Offer consulting service, sample's process experiment , equipment selection, training and the installation to the engineers and the user of the buyer.
1) Training : after the acceptance check by the buyer, the supplier offer the free training for 2-3 operators and maintenance persons of the buyer.
2) Training and installation time is 3-5 days
3) Installation & adjustment : When the buyer receives the equipment, the supplier install and adjusts the equipment with buyer's assistance on site then finally deliver it to the buyer.
2. After-sale services
Our company offer One-year warranty and lifetime maintenance for the buyer , during the warrantyperiod, if there is any fault in the course of using the equipment (except the man-made factors and factors other than force majeure), we offer free maintenance, the parts which need to change also provided by us(except the consumable parts) . After the warranty period, we will charge appropriately according to the maintenance situation.
Write Your Own Review