常见问题

We are a specialized manufacturer of embroidery machines and accessories.We are located in ShenzhenCity,Guangdong Province ,China. Enjoying the geographical and resource advantages , We are able to provide you machine with good quality and reasonable prices.

Just ask our customers, view our company profile, assessment of capability, factory glimpse, and the honor we had. And why not contact us or pay a visit to us?

We are making high standard embroidery machines with complete new ,original and inspected parts.Our products are with CE & SGS certificate.

We are making regularly : High speed Embroidery machine, Chenille /Taping machine, Coiling/ cording Embroidery machine,Cap & T-shirt Embroidery machine. 

Think: ready-made garment/cap/hat, or garment before sewing, or just flat fabric?

Normal flat stitch, or special chenille/chain/loop stitch, or sequin/paillette, or cord/tape/ribbon to add value to your embroidery?

Think: how big is your factory and how much is your expected production?

The embroidery area on each head depends on the maximum area of your embroidery design to run.

Think: How much would you pay for a machine? What we offer is what you need!

There are many factors that affect the thread break, to reduce thread break, the machine must be horizontal, stable, small jitter while it is in operation; the spindle rotation is light; the distance between the parts to be small; the installation of the parts to be accurate (the parameters of the reference Point is correct); through line and the hole to be smooth; the following are some of the more common reasons for thread break:


Needle
  (a) the smoothness of the needle is not enough, the polishing of needle groove and pinhole  are not good,the needlepoint is blunt
  (b) the needle is bent, or the installation is not in place;
  (c) the mounting angle of the needle is not correct, the trunking is not in front, the left or right is too much, or the trunking is on the back;
  (d) there are attachments (such as glue) in the pinhole;
  (e) the position of Needle clamp screw  is not correct, it should be in the positive side of the right about 40 degrees;

Line
  (a) the quality of line is poor , strength is not enough, too hard, too brittle, too many lines on the link;
  (b) rotate not correctly, use the left line;
  (c) the tension of the line is too big